Menu

Expert Guide: The Secrets of Running a Successful BIM Coordination Meeting

One of the most important aspects of Building Information Modeling (BIM) is the collaboration and coordination it achieves among the team members. But to exploit it to the optimum you have to conduct the coordination meetings in an effective and productive way.

If you are successful, your building team will be able to comprehend the full benefits of the BIM coordination and make the best out of it. They may need a bit of time adjusting to the new technical details, but after they are used to it there is nothing to stop them.

How to Run a Successful BIM Coordination Meeting?

Invest in the right strategy to get the best results. Try to follow the tips discussed below to help you on your journey. These are revealed by experts of the BIM industry and are best practices in themselves.

1. Give it Time

3D modeling, and understanding the flaws of a design takes time. Conducting a meeting successfully is not a one day task. You need to devote time to prepare yourself and practice thoroughly before the actual meeting.

You will need a bit of time if you are new to the BIM solution for loading the correct models, navigating through the system and tweak visibility settings.

Practice for 15 minutes prior to loading models and accessing views for the aspects concerning your interest. It eliminates delay and down time when you are conducting the real meeting. More importantly, understand the project requirements first.

2. Find a Skilled Navigator

You will need someone who knows the BIM solution thoroughly and also is familiar with the model of your project.

Someone who doesn’t have experience can mess up and fumble during navigating the complex models while the meeting is on- that is going to bring down the whole productivity of the meeting which is against your objective.

3. Take down Notes

The notes taken down during the last meeting and open action items should be based to shape the agenda for the current meeting. You can use this method effectively to address open coordination issues before bringing up new discussions.

Adopting this system also helps you keep things on track.

4. Value the Time of Team Members

Apart from attending meetings, the members of your BIM consulting team need to complete their tasks on time. You can use your team’s time wisely by setting up meetings with different team members on a structured basis.

You can start off with the design team and then call the structural engineer to discuss on things. Next, you can improve the coordination effect by discussing things with the MEP and structural members.

There is no need for the whole team to be present in the same room at the same time.

Inform your BIM team members about the approach you will take while conducting the meetings. It can take some time for them to collaborate effectively using new technological leverage.

Read More

FAQs Pertaining to Ultrasonic Cleaning

Whenever there is a new technology in the market, there is a flock of questions in the minds of consumers regarding the concept, functionality and usability of the technology. Being blessed with inquisitive and curious minds, humans always want to know each and every aspect of a new machine or technology. One such technology is ultrasonic cleaner. Though it was introduced in the market way long back, but still many people don’t have any idea as to what ultrasonic cleaner is and what is its exact use?

Based on the concept of ultrasonic cavitation, ultrasound cleaning brought a revolution in the cleaning of delicate jewellery pieces, surgical instruments and expensive machinery parts. But still the users don’t have enough information regarding the whole machine. They rely on the information that is being fed to them by the manufacturers. This can largely influence the decision of the customer regarding the kind of ultrasonic cleaner he buys. So in this post, we have brought certain and very basic FAQs that every purchaser of ultrasonic cleaner has in mind.

FAQ 1. What exactly is the concept behind ultrasonic cleaning?

The ultrasonic cleaning system comprises a cleaning tank, solution, an element for heating, dunking containers along with control panels. This whole system creates waves that make a disturbance in the cleaning solution, which furthers generates a cavitation process that leads to the cleaning action. The items to be cleaned are placed in the containers which are then lowered in the cleaning solution and cavitation process is started. The cleaning solution along with cavitation process scrubs down all the grime, dirt and stains from the items.

FAQ 2. Instead of cleaning solution, can water be used for ultrasonic cleaning?

For the creation of effective cavitation process, the surface tension of the solution should be of the minimum level. And this can be achieved only when the non-ammoniated solution is properly diluted and is used as the cleaning solution. This solution has the least surface tension resulting in the efficient cleaning process.

FAQ 3. Is there any variation available in the cleaning solutions?

Yes, there is a wide variety of cleaning solutions that are available in the market. Simultaneously, the kind of cleaning solution used for the ultrasonic cleaning by Hilsonic greatly affects the cleaning efficiency. Generally, there are three types of cleaning solutions available in the market: mild alkaline, mild acid and solvent replacement. All three of them have their own cleaning efficiency.

FAQ 4. Why is degassing important?

During the cleaning process, the oxygen is released and is dissolved in the cleaning solution. This oxygen remains trapped until the degassing is done. The dissolved oxygen hampers the cleaning process. That is why it becomes imminent to degas the solution on a frequent basis.

When it comes to the cleaning of delicate and expensive medical instruments as well as other mechanical parts, no other cleaning process can beat the ultrasonic cleaning. This process is going to rule the industries in the coming time as well.

Read More

How does personal injury claim work

Over 3 million people are injured in the UK each year due to a myriad of reasons. But there are experts who will get the client on the right path in this regard. There are many clients both corporate and individual whom solicitors of good reputation have helped out. Most of the clients are unaware of the fact the personal injury law is complex and therefore most of the times claim is not filed. However, good legal service assures all such clients that with the expert team it is very easy for the client to get the compensation deserved. On such listings as Solicitors.Guru you can find a law expert in any field. The UK solicitors ensure that the best specialist is assigned as per the nature of the case. They also ensure that the end to end solutions based on law is provided. With good legal aid the client is sure to get personal injury claims. The process is simple and straightforward. So what are steps which should be taken in this regard?

Making claims

It is first and foremost step which is taken by high-level law firms as a part of the process. The defendant is informed through a letter that personal injury claim has been made by the client. Expert opinion and relevant laws are also abiding while the letter is sent. If there is a need of any doctor or physician in this regard also provide or recommend one. It makes the process easy and cuts the time. The letter is always drafted keeping in view the UK personal injury claim law. It explains the case scenario in full so that the defendant can reply or study what is wrong on his part. This letter has a reply deadline usually three months maximum. If the claim is accepted then firms provide mediation services out of court to save cost and time. On the contrary, the case is taken to the court of law and dependable solicitors ensure that the clients get what is rightfully his. Well, if an attorney couldn’t make it with a case, then at least you can avoid money loss – if you need more details check out no win no fee option issue.

Part 36 offer

In this step first of all the value of the claim is assessed and then the client is told by the law firm that whether the claimed amount is in line with the damage. Law firms also offer the clients to make part 36 offer. UK law firms always assess the situation in full before asking the client to make such offer. The next part depends upon the defendant. If the response is in line with the part 36 offer then the matter is settled out of court. Else it is dragged to the court of law.

Court proceedings

Most UK law firms always help in the court proceedings regarding the issue. It includes full client representations and expert views for the court to decide the matter. However, the court proceedings are considered as last resort if the arbitration outside court fails. It only happens if the defendant says that they are not ready to pay the amount. The court interferes in such matters and awards the compensation if client proves his right for the same.

Read More